Voila ce que j'ai trouvé, je croyais aussi qu'Orange était la petite perte de pression:-(Amelien350 a écrit :il me semble que c'est :
Voyant rouge = perte de pression des pneus
Voyant orange = problème sur le capteur de pression des pneus (et donc pas forcément un problème de pression en tant que tel).
Pour le remettre a zero, c'est tres simple appuyer 5 sec sur le bouton.
j'ai perdu bêtement 20 min l'autre jour.
2.1.2 ”Warning” status
The signal lamp lights up red and an acoustic signal sounds. The state ”Warning” (pressure drop of approx 30%) indicates that road safety is no longer assured. In the state ”Warning”, it is not possible to run the learning procedure. Pressing the RPA button for 4 seconds resets the RPA to the ”Active” state.
2.1.3 ”Inactive” status
The warning lamp lights yellow. In the ”Inactive” state, all RPA functions are shut down.
2.1.4 ”Fault” status
The warning lamp lights yellow. The ”Fault” state is created by a sensor fault detected by the DSC control unit or RPA button actuation of more than 120 seconds. With ”Ignition On” as well as on starting diagnosis, the RPA becomes active again and then again reports a fault in the case of a sensor fault or a timeout of the RPA button signal.